According to the industry standard revision plan, the relevant standardized technical organizations and other units have completed the revision of 55 mechanical and light industry standards such as "micro-valve-controlled lead-acid battery" (standard name and main content, etc.). Before approved by the above standard, for further hearing of the comments from all walks of life, it is publicized, and the deadline is on April 30, 2012. Attachment: 55 machinery, light industry standard name and main content number standard number standard name standard main content replacement standard hike
Machinery Industry
1, JB / T 11338-2012 Micro Valve Lead Acid Battery This standard specifies the product classification and shape, requirements, experimental methods, inspection rules, signs, packaging, transportation and storage of micro-valve-controlled lead-acid batteries. This standard is suitable for micro-valve-type lead-acid batteries.
2, JB / T 11339-2012 Electric Bike Valve Sealing Lead Acid Battery Using Technical Specifications This specification specifies the installation, use, and replacement of electricity battery installation, use and replacement of electric boosts. This standard is suitable for electric booster cavity-controlled sealed lead-acid batteries.
3, JB / T 2599-2012 lead-acid battery name, model preparation and naming Measures This standard specifies the name and model preparation of lead-acid batteries. This standard applies to the name and model of lead-acid battery. JB / T 2599-1993
. This section is only applicable to the safety valve of the valve-controlled lead-acid battery.
Rules and signs, packaging, handling, and storage. This section is suitable for a plastic housing for valve-controlled lead-acid battery safety valves.
Test methods, inspection rules and signs, packaging and carrying. This section is suitable for rubber caps, spools of valve-controlled lead-acid battery safety valves.
, Requirements, test methods, inspection rules, logos, packaging, handling, and storage. This section is suitable for lead-acid batteries safety valves, terminals, pole columns with rubber pads and rubber circles.
, Technical requirements, test methods, inspection rules, logos, handling, and storage. This section is suitable for microporous suction tablets for valve-controlled lead-acid battery safety valves.
9. JB / T 7688.5-2012 Metallurgical Crane Technical Conditions Part 5: Casting Crane This section stipulates the technical requirements, test methods and inspection rules of cast cranes. This section is suitable for cranes of lifting molten metal. JB / T 7688.15-1999
Light industry industry
10, QB / T 1455-2012 Coating Stamp Paper (including Coated Stamp Post) This standard specifies the product classification, technical requirements, test methods, test rules, signs, packaging, and transportation of raw stamps and coated stamp original paper. And store. This standard applies to coating stamp paper and original paper for making coated stamp paper. QB / T 1455-1992QB / T 1598-1992
11, QB / T 1477-2012 Electronic Piano This standard specifies the classification, requirements, test methods, inspection rules and signs, packaging, transportation, and storage of electron-piano products. This standard is suitable for electronic piano that is tonic with electronic technology. QB / T 1477-2003
12, QB / T 1657.1-2012 Lip vibrating Phonor Musical Article General Technical Conditions This standard specifies the general terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation, and storage of lip vibrating gas musical instruments. This standard applies to the west tube instrument of the cup of mouth shape. QB / T 1657.1-2002
13, QB / T 1657.2-2012 Trumpet This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of lip vibrating gas musical instruments. This standard is suitable for vertical valve bb adjusting short, BB tuning, BB tuning trumpet, C tune small, swivel valve bb tuning number. QB / T 1657.2-2002
14, QB / T 1657.3-2012 Circular This standard specifies the requirements, test methods, test rules and signs, packaging, transportation and storage of lip vibrating gas musical instruments. This standard applies to vertical valve keys and swivel valve keys. QB / T 1657.3-2002
15. QB / T 1657.4-2012 Monthly This standard specifies the terms, requirements, test methods, inspection rules and signs, packaging, transportation, and storage of the lip vibrating gas musical instrument. This standard is suitable for BB tune long numbers, BB-reconciled pitch numbers, BB-F, and pitch, BB is chopped.
16, QB / T 1657.5-2012 Sino-SMS This standard specifies the requirements, test methods, test rules and signs, packaging, transportation, and storage of the lip vibrating gas musical instrument. This standard applies to the tone number and BB arratuous, swivel valve bonds.
17, QB / T 1657.6-2012 Low-time number This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation, storage. This standard is suitable for vertical valve keys and swivel valve bb adjustment, C is adjusted to low tone, BB adjustment, BE adjustment, C adjustment, f, low tone, and BB adjustment, C double-calling low voice.
, Packaging, transportation, storage. This standard is suitable for the west tube instrument of the reed vibrating havef spring, two-reed and edge prismatic blowhop. QB / T 1658.1-2002
19, QB / T 1658.2-2012 Flute Flute Piccol This standard stipulates that the edge of the edge-prize sound musical instrument flute, the shortfire product requirements, test methods, inspection rules and signs, packaging, transportation, storage. This standard applies to the Hom-type C-tone Flute, the bass flute and the G-tone tile, this standard is also suitable for the Sommp type C-tone. QB / T 1658.2-2002
20, QB / T 1658.3-2012 Clarinet This standard specifies the requirements, test methods, test rules and signs, packaging, transportation and storage of the spring vibrating air musical instrument. This standard is suitable for BB adjustment, A adjustment, and BE-rated spring tube, and is also suitable for BE-tone monofunctive and BB-lowering sound casing. QB / T 1658.3-2002
21, QB / T 1658.4-2012 Treble twians This standard specifies the requirements, test methods, test rules and signs, packaging, transportation and storage of spring vibration. This standard is suitable for C-t-tone double reed tubes. QB / T 1658.4-2002
22, QB / T 1658.5-2012 Bass double spring tube This standard specifies the requirements, test methods, test rules and signs, packaging, transportation and storage of the reed vibrating product. This standard is suitable for C-adjust, F-chorus double reed tubes. QB / T 1658.5-2002
23, QB / T 1658.6-2012 Saxo Tube This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation, and storage of the reed - resistant musical instrument. This standard is suitable for BB tuning sound saxophone, BE-tune Saxophone, BB-called Sacry saxophone, BE tunes the bass saxophone. QB / T 1658.6-2002
24. QB / T 2205-2012 NAS Solt Take Paper This standard specifies the product classification, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of nitrogen salt sunlight. This standard is suitable for contact copying with a transparent or translucent manuscript, and develops a nitrogen salt sunlight directly to a dry or semi-dry method. QB / T 2205-1996
25, QB / T 2224-2012 Shoes Help High Temperature Folding Performance Requirements This standard specifies the low temperature resistance requirements, test methods and inspection rules of footwear. This standard is suitable for a variety of counterfeit materials. QB / T 2224-1996
26, QB / T 4319-2012 Sulfate All Chlorinated Bleaching Pulp Types This standard specifies the principle of determination of sulfate allochloride chlorine. This standard is suitable for native fiber slurry and non-wood pulp such as sulfate whole chlorine, and does not include eclipsed fiber slurry.
27, QB / T 4320-2012 Flowers Wrapped Paper This standard specifies the product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation, and storage of flowers, packaging paper. This standard is suitable for hand-wrinkled paper in flowers wrapping paper.
28, QB / T 4321-2012 L-Arabose This standard specifies the terms and definitions, requirements, test methods, inspection rules, signs, packaging, transportation and storage of L-Arabose. This standard is suitable for the production, testing, crystallization, drying, chromatography, crystalline, fermentation, chromatography, crystallization, drying, chromatography, crystalline, fermentation, chromatography, crystallization, fermentation, chromatography, crystallization, fermentation, chromatographic separation, crystalline, fermentation, chromatography .
29, QB / T 4322-2012 Allowed glue This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, signs, packaging, transportation and storage. This standard is suitable for the production, testing and sale of available-to-raw glue from sucrose or glucose as the main raw material, fermentation, (separation).
30, QB / T 4323-2012 Piano Strings This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage of piano strings. This standard is suitable for piano.
31, QB / T 4324-2012 Effects of Effects of Equipment for Effects of Equipment This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation, and storage of moon musical instruments. This standard applies to the effect of the moon musical instrument. This standard does not apply to software effects.
Rules and logos, packaging, transportation, storage. This standard applies to multi-functional speakers for playing in two or more different electronics.
, Transportation, storage. This standard applies to electricitarian use speakers. This standard does not apply to ethical, folklar guitar.
34, QB / T 4327-2012 Keyboard instruments Universal technical conditions This standard specifies the classification, requirements, test methods, inspection rules and signs of keyboard instruments, packaging, transportation, and storage. This standard applies to the keyboard instrument speaker.
35, QB / T 4328-2012 Electronic Drum Speaker General Technical Conditions This standard specifies the classification, requirements, test methods, test rules and signs, packaging, transportation and storage of electronic drum speakers. This standard is suitable for electronic drum speakers.
36, QB / T 4329-2012 Bell Shoes This standard specifies the classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of cloth shoes. This standard applies to fabrics such as textiles, knitwear, etc., is made of adhesive, sewing, molding, vulcanization, injection molding and other processes.
37, QB / T 4330-2012 Bring PVC Courtyard Shoes This standard specifies the terms and definitions, product classification, technical requirements, test methods, inspection rules, signs, packaging, transportation, and storage of PVC garden shoes. This standard is suitable for injection molding monochrome, multi-color stripped PVC garden shoes (boots).
38, QB / T 4331-2012 Children's Travel Shoes This standard specifies the product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of children's travel shoes. This standard applies to children's travel shoes and infant travel shoes that are generally wear.
39, QB / T 4332-2012 Crafts Shoes This standard specifies the terms and definitions of process shoes, product classification, technical requirements, test methods, inspection rules and marks, packaging, transportation, storage. This standard is suitable for use in natural leather, synthesis (artificial) technologies, fabric or plastic, making soles with thermoplastic synthetic materials, is made of injection molding, glue, metal links or manual sewing, assembly, etc. Decorative features suitable for generally wearing shoes.
Comprehensive evaluation process. This standard applies to the footability evaluation of footwear designed to be designed with new models, new materials, or specific uses.
41, QB / T 4334-2012 Footwear Motion Control Ability Assessment Test Method This standard specifies the method of evaluating the ability of footwear in the test and comparison analysis. This standard applies to the evaluation of sports control capabilities in footwear products.
42, QB / T 4335-2012 Shoes Foot Nail This standard specifies the product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation, and storage of shoe-based feet. This standard is suitable for shoes with four foot and two feet.
43, QB / T 4336-2012 injection plastic shoe with this standard specified the technical requirements, test methods, inspection rules and packaging, transportation and storage of injection molded plastic shoes. This standard applies to plastic shoe (with or without belt) of various types of injection molded plastic.
), Cadmium (CD), nickel (Ni), chromium (Cr), cobalt (CO), copper (Cu), antimony (Sb), arsenic (AS), and mercury (HG) content
Measurement method. This standard is suitable for the determination of heavy metal content in all shoe polish, but is not applicable to the determination of the adhesive oil has been used.
Test method of nonylphenol polyoxyethylene ether npneo). This standard applies to all footwear products and footwear components.
Nine heavy metal lead (Pb), cadmium (CD), nickel (Ni), chromium (CR), cobalt (CO), copper (Cu), cadmium (CO), Copper (Cu), Arsenic (AS), and mercury (Hg) Measurement method of content. This standard applies to all footwear products and components.
Nine heavy metal lead (Pb), cadmium (CD), nickel (Ni), chromium (Cr), cobalt (CO), copper (Cu), antimony (Sb), arsenic (AS) and mercury (Hg) content test methods. This standard applies to all footwear and footwear components.
48, QB / T 4341-2012 antibacterial polyurethane synthesis leather antibacterial properties test methods and antibacterial effects This standard specifies antibacterial polyurethane to antibacterial and anti-ambigulent performance test methods and effect evaluation. This standard applies to antibacterial properties test and effect evaluation against anti-bacterial polyurethane synthesis leather.
49, QB / T 4342-2012 Costume Polyurethane Synthetic Reform Safety requirements This standard specifies the safety level, requirements and test methods of urethane synthesis of clothing. This standard is suitable for synthesis of garments made from major raw materials such as base fabric, polyurethane resins, and after wet or dry coatings, and post-processing.
50, QB / T 4343-2012 Synthetic Hydrotic Slurry This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, signs, packaging and storage of synthetic leather water-based color slurry. This standard is suitable for synthetic leather water-based color paste prepared by water as a dispersion medium, manufactured by various organic, inorganic pigments and additives.
51, QB / T 4344-2012 Skirt Belt Polyvinyl Chlorofin Article Specifies the product classification, requirements, test methods, inspection rules, logos and packaging, transportation, and storage of the skirt belt with polyvinyl chloride. This standard is suitable for use in a skirt belt made of a plasticizer and a plasticizer and other additives in a polyvinyl chloride resin and other additives.
52, QB / T 4345-2012 Protective sole Polyurethane resin This standard specifies the requirements, test methods, test rules, markers and packaging, transportation and storage of polyurethane resins in protective sole. This standard is suitable for use in a component of the polyol mixture as the main component, the isocyanate prepolymer is a two-component protective sole for B component of the main component, and the industry is also known as the protective sole rack. This standard also applies to safe soles polyurethane resins.
53, QB / T 4346-2012 Dry polyurethane thin film for fabric composite stipulates the classification, requirements, test methods, test rules and signs, packaging, transportation, and storage of fabric composite dry polyurethane films. This standard is suitable for use in polyurethane resins, colors, auxiliaries as the main raw materials, and is coated with a carrier, and finally coated with a polyurethane coating, and is used for composite with fabric. Film.
54, QB / T 4347-2012 Automotive polyvinyl chloride film and sheet This standard specifies the classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage of polyvinyl chloride thin films and sheets. This standard is suitable for use in a polyvinyl chloride resin as a main raw material, adding a plasticizer and other additives, calendered or coating transfer, etc., is made into a non-foamed film and sheet for automotive interior parts.
55, QB / T 4348-2012 Kitchen Oil Dissaine This standard specifies the requirements, test methods, test rules and signs, packaging, transportation, and storage of kitchen oil scale cleaning. This standard is suitable for formulation of various surfactants, auxiliaries, solvents, for use in various hard surfaces of the kitchen. This standard does not apply to solid-specific kitchen oil scale cleaning agent products.