According to industry standards and revision plan, relevant standardization technical organizations and other units have been completed "micro VRLAB" and 55 machinery, light industry standards revision work (the standard name and main content annex). Prior to the approval of the above criteria published for further listen to the views of the community, especially to be publicized, deadline April 30, 2012.
Report: 55 machinery, light industry standard name and serial number main content Standard No. standard name standard main content instead of standard standard adoption case
Machinery Industry
1, JB / T 11338-2012 miniature VRLAB This standard specifies the miniature VRLAB product categories and dimensions, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to micro VRLAB.
2, JB / T 11339-2012 electric bikes VRLA batteries using technical specifications This specification defines the electric bikes VRLA battery installation, use, replace the technical requirements. This standard applies to electric bikes VRLA batteries.
3, JB / T 2599-2012 lead-acid batteries name, model preparation and naming methods This standard specifies the name and model designation and naming approaches lead-acid batteries. This standard applies to lead-acid batteries and naming names and model preparation. JB / T 2599-1993
4, JB / T 11340.1-2012 VRLAB valve Part 1: Safety valves This section defines the scope VRLAB safety valve, requirements, test methods, inspection rules and signs, handling and storage. This section applies only to VRLAB safety valve.
5, JB / T 11340.2-2012 VRLAB valve Part 2: Plastic case This section defines the scope of VRLA valve with plastic casing, terminology, requirements test methods, inspection rules and signs, packaging, transportation and storage. This section applies to VRLAB safety valve with a plastic shell.
6, JB / T 11340.3-2012 VRLAB valve Part 3: rubber cap, valve This section provides VRLAB rubber cap valve spool range term definitions, requirements, test methods, inspection rules and signs, packaging handling and storage. This section applies to VRLAB rubber cap valve spool.
7, JB / T 11340.4-2012 VRLAB valve Part 4: rubber mats, rings This section provides VRLAB safety valve, terminal pole with a rubber mat, range circle, terminology, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This section applies to a safety valve lead-acid batteries, terminals, pole with rubber mats and rubber ring.
8, JB / T 11340.5-2012 VRLAB valve Part 5: microporous filter acid tablets This section provides VRLAB valve with microporous filter acid tablets term structure and basic dimensions, technical requirements, test methods, inspection rules, marking, handling and storage. This section applies to VRLAB valve with microporous filter acid tablets.
9, JB / T 7688.5-2012 metallurgical crane technical conditions - Part 5: Casting Crane This section specifies the content of the technical requirements for casting crane, test methods and inspection rules. This section applies to a crane lifting molten metal. JB / T 7688.15-1999
Light Industry
10, QB / T 1455-2012 coated stamp paper (including coated stamp paper) This standard specifies the coated stamp paper and coated stamp paper product categories, technical requirements, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to the stamp paper and coated paper used to make coated stamp paper. QB/T 1455-1992QB/T 1598-1992
11, QB / T 1477-2012 electronic piano This standard specifies the electrical musical instruments with electronic piano product classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to electronic technology electronic piano sounds. QB / T 1477-2003 & nbsp;
12, QB / T 1657.1-2012 lip vibration gas alarms General Instrument technical conditions This standard specifies the general terms and definitions lip vibration gas alarms instruments, classification, requirements, test methods, inspection rules and signs, packaging, transportation, storage. This standard applies to West wind cup lip mouthpiece class. QB/T 1657.1-2002
13, QB / T 1657.2-2012 S This standard specifies the gas alarms lip vibration instruments trumpet product requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to vertical valve key bB tune cornet, bB Trumpet, bB increase trumpet sound, C Trumpet, rotary valve key bB Trumpet. QB/T 1657.2-2002
14, QB / T 1657.3-2012 Horn This standard specifies the lip vibration gas alarms musical horn product requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to vertical valve keys and rotary valve horn button. QB/T 1657.3-2002
15, QB / T 1657.4-2012 trombone This standard specifies the terms lip vibration gas alarms trombone instrument products, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to bB tune tenor trombone, bB tune tenor trombone, bB-F tune tenor trombone, bB tune bass trombone.
16, QB / T 1657.5-2012 Euphonium This standard specifies the gas alarms lip vibration instruments Euphonium product requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to the tune bE key vertical valve euphonium and bB tune vertical, rotary valve key Euphonium.
17, QB / T 1657.6-2012 euphonium This standard specifies the gas alarms lip vibration instruments euphonium product requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to vertical valve keys and rotary valve key bB tone, C tune euphonium, bB tune, bE tone, C tone, F tone tuba, and bB tune, C tune times euphonium.